產品品牌：荷蘭PENKO稱重儀表
產品名稱：PENKO 4-Channel稱重儀表,荷蘭PENKO 4-Channel Flex稱重控制器
咨詢電話：086 020+82303306
產品地址：http://pay.www.ppzm7.com/
您還在為買不到合適的荷蘭PENKO稱重儀表而煩惱嗎？廣州南創電子科技有限公司與荷蘭PENKO公司成為貿易聯盟，打造荷蘭PENKO品牌優質供應商。
荷蘭PENKO 4-Channel Flex稱重控制器產品描述：
四通道全觸屏高速控制器，用于任何類型的稱重、測力、扭矩和配料場合。廣泛應用于料斗秤、包裝秤、皮帶秤、分選秤及配料系統時，可使稱量過程準確無誤、高效方便。
Measurement Functions Automatic zero tracking, motion detection, zero, tare, preset tare,
net mode, peak hold, valley hold, bar graphs multi range, multi interval
Memory Allocation Calibration data Flash, dynamic data in SRAM with battery backup.
Real-Time Clock Standard with NiMh battery backup.
Display methods Each channel separate
Total weight of selected channels
ENVIRONMENTAL
Operating Temp -10°C to +40°C [14°F to 104°F]
Storage Temp -20°C to +70°C [-4°F to 158°F]
Relative Humidity 40–90% non-condensing.
APPROVALS (PENDING)
OIML R76 10000d single or multi interval at ≥0,4 µV scale interval
MID certified
OIML R51 Automatic catch weigher
OIML R61 Automatic gravimetric filling instrument
OIML R106 Automatic rail weigh bridge
OIML R107 Discontinuous totalizer
EU-type approval no
TOUCH SCREEN
Display type High resolution TFT LCD 640 x 480 pixels, 256 colors, High brightness 500 cd/m2. High Contrast 350:1
Display functions Completely menu driven with graphical user interface
Display Rate Selectable 1,2,3,5,10 or 25 updates/s
Display Filter 0, -6, -12, -18, -24, -30, -36, -42 and-50 dB
Display Filter range Selectable in any range of the weight display
Display suppression Selectable in any range of the weight display
Status enunciators Zero, No Motion.
Weight Digits 6 digits with leading zero suppression, selectable height = 18mm or 9 mm.
Display operation Operate, configure and calibrate via four interfaces
1-Front panel, (Touch screen)
2-RS232
3-Ethernet
4-USB
Touch screen Glass screen, 2 mm of resistive type
Display size 5,7 inch, (145 mm)
Display material Front foil PET 175u
荷蘭PENKO 4-Channel Flex稱重控制器關鍵特性：
◆4通道實時控制
◆5.7英寸全觸屏高分辨率TFT LCD 640x480像素彩色顯示屏，6位顯示
◆1600次/秒的采樣速率
◆非線性<0.005%
◆內置分辨率24比特
◆可連8個350Ω 稱重傳感器
◆自動零點跟蹤、動態檢測、零點、皮重、預設皮重、凈重模式、峰值保持、谷值保存、條形圖多級范圍、多級間隔
◆可選模擬量輸出：4-20毫安,0-20毫安,4-24毫安和0-24毫安
◆可選RS232、RS422、RS485、以太網、USB、Canbus及Profibus DP協議
◆電源18...32 V DC，或100...240V AC（可選）
荷蘭PENKO 4-Channel Flex稱重控制器規格
上一篇：返回列表
